You are currently viewing GMC.com (United States). Close this window to stay here or choose another country to see vehicles and services specific to your location.

how to

HOW TO USE EV ENERGY TRANSFER FEATURES

Energy transfer features allow your vehicle to power a variety of tools, electronic devices or your home.


Energy transfer through bed outlets, a GM-approved accessory or V2H Bundle allows you to supply power to some devices or appliances (via outlets or the vehicle’s charge port) or your properly equipped home.* Depending on your vehicle, you may have access to these forms of energy transfer:

  • Energy transfer outlets: Connect to the vehicle’s 120V/2.4kW and 240V/7.2 kW Energy Transfer outlets to power a variety of tools and electronic devices or appliances.
  • Vehicle to Home (V2H): Connect your vehicle to your residence’s GM Energy Home System to provide backup power to your home like a generator.
  • Vehicle to Load (V2L):  Connect a GM Genuine Parts Power Bar/Power Bar+ to your vehicle’s charge port to power up to four 120V AC devices or appliances with up to 3 kW/25 amps. Vehicles equipped with a NACS charge port require a NACS-to-J1772 adapter to connect to the J1772 Power Bar or Power Bar+ V2L accessory.

You can use the center display’s Controls app or the Energy Transfer screen of your vehicle’s mobile app to manage the transfer of energy. The in-vehicle Status app and your vehicle’s mobile app* both allow you to monitor the vehicle’s battery status.

ENERGY TRANSFER USING OUTLETS

Energy transfer outlets, also known as Power Station, consist of seven electrical outlets (six 120V outlets and one 240V outlet) located in the truck bed, eTrunk™ and vehicle cabin. If equipped, you will see a green LED light up near the outlet to indicate power flow is active. The truck bed, eTrunk™ and cabin outlets each have their own LED. LEDs in the unused outlet locations on the truck may light up when you’re using an outlet to show you that power is being supplied.



 

USING ENERGY TRANSFER OUTLETS WHEN YOUR VEHICLE IS OFF

  • Open the in-vehicle Charging App’s Energy Transfer screen and toggle Persistent Power to On to enable Power Station outlets to transfer energy while the vehicle is off. 

  • With your vehicle on and parked, open Controls and Safety in the center display or the vehicle’s mobile app and select Energy Transfer. From here, you can adjust the Timer and Battery Reserve:
    • Timer: You can set a Timer so the outlets (or charge port if using V2L energy transfer) automatically turn off after a set number of hours.

Note: Your vehicle will turn off the outlets if it reaches the default Battery Reserve limit before your time limit is reached.

  • Battery Reserve: You can set a Battery Reserve so the outlets (or charge port if using V2L, V2V or V2H energy transfer) automatically turn off when the vehicle’s battery hits a certain percentage of state of charge.

Note: If you don’t set a limit, the default Battery Reserve limit is 20%.

Make sure you are someplace where the vehicle can be charged if you set a low state of charge limit. You may see a notification letting you know vehicle performance may be affected when you do this.

  • Then, toggle Power Station to On to keep power flowing to the outlets while your vehicle is off.
    • The Power Station app shows how much power the outlets are drawing from your vehicle’s battery in real time.

HOW TO RESET ENERGY TRANSFER CIRCUITS

Powering a load that isn’t compatible with the Power Station’s energy output or a triggered ground fault circuit interrupter (GFCI) can interrupt the charge, resulting in loss of power. You’ll need to reset the affected circuits to resume power to their outlets. If power unexpectedly stops flowing to any of the vehicle’s outlets:

  • Remove all devices from the outlets and ensure the outlet covers are closed.
  • Press the Reset button on the bed outlet module to clear the fault and resume power to the outlet.
    Note: It is recommended that you close all outlet covers to reset the circuit.

USING BI-DIRECTIONAL ENERGY TRANSFER

Your EV can be a source of backup power for your properly equipped home during a blackout with the help of vehicle-to-home charging solutions.1 Products including the GM Energy PowerShift Charger, Dark Start Battery and the GM Energy Home Hub & Inverter can be installed by a certified professional, allowing you to transfer energy from your vehicle’s battery to your home during a blackout.

You can power appliances and other corded devices by plugging a GM Genuine Parts Power Bar/Power Bar+ into your vehicle’s charge port and connecting the other end to the item you wish to charge.

For more information on purchasing GM Energy home systems, or PowerShift bi-directional charging cable or adapter, visit https://gmenergy.gm.com/.

SAFETY CONSIDERATIONS WHEN USING ENERGY TRANSFER OUTLETS

  • Do not use the system in wet or rainy conditions.
  • Do not use electrical devices when:
    • They are not working properly or have faulty connections.
    • They are loose-fitting (especially when the vehicle is moving).
  • Always disconnect devices when they are no longer in use.
  • Do not connect your on-vehicle or accessory outlets to your home. Connecting to your home can result in damage to your home and/or vehicle. The GM-provided V2H system is the recommended method to safely connect to your home.

USAGE TIPS

  • Set the Timer feature when using transfer for short events such as DIY projects, BBQs or camping.
  • Use the Battery Reserve setting for longer events or events with unknown end times such as power outages.

For your security, please don’t include personal info such as phone number, address or credit card details.


Q&As

What happens if I set my Battery Reserve to 0%?

Draining your vehicle's battery to 0% is not recommended. If you set your Battery Reserve to 0%, your vehicle will stop providing power to the outlets when it reaches 0%. Connected devices may draw your vehicle’s battery down until it doesn’t have sufficient energy to power the vehicle. If this happens, you’ll need to charge your vehicle before it can be driven again. Draining the battery to 0% could also result in the vehicle being unable to charge battery. If the vehicle cannot be charged, it will need to be towed to a dealership for service.

What happens if I set a Battery Reserve limit that is above my vehicle’s current state of charge?

If you try to use energy transfer when the vehicle is off and the battery’s state of charge is below your Battery Reserve limit, energy transfer will not begin. If the vehicle is on, you will receive an alert that your battery’s state of charge is below the selected limit.

Our support search experience is powered by an AI assistant.


NEED MORE HELP?

Submit a support request to get answers to your vehicle questions about over-the-air software updates, driving and safety features, Wi-Fi issues and more.


For information specific to your vehicle, please refer to your Owner’s Manual.