quick start


Extract Mode allows you to raise your vehicle nearly 6 inches above normal ride height using the Air Ride Adaptive Suspension system. This is designed to help you clear obstacles when off-roading. Extract Mode will become available through an over-the-air (OTA) or dealer update at a later time.

Pre-production model shown. Actual product may vary.

Extract Mode is used for off-road situations when greater clearance to obstacles is required.

To Engage and Disengage Extract Mode:

  1. Locate the ride height controls on the top of the Driver Mode Control dial on the center console. The Raise button is located at the top (12 o’clock) and Lower is at the bottom (6 o’clock).
  2. Select Terrain Mode by rotating the Driver Mode Control dial.
  3. Press the Raise button on the Driver Mode Control until you see Extract Mode in the Driver Information Center (DIC). Multiple pushes are needed if starting at normal ride height.
  4. To disengage Extract Mode, select a lower ride height by pressing the Lower button.

Note: Frequent use of the air suspension system may result in the system requiring a cooling period before continuation.

Note: Vehicle is limited to low speeds when in Extract Mode.

For your security, please don’t include personal info such as phone number, address or credit card details.



Communicate with one of our specialists.